NEW CUSTOMERS:   GENERAL INFO   |  COOLER INFO   |  TROUBLESHOOTING
                                   RESIDENTIAL APPLICATION FORM  |  COMMERCIAL APPLICATION FORM

WATER COOLER INFO

Regular maintenance is required for a water dispenser.

• Cleaning – Drip tray and shell can be cleaned with any non-abrasive household cleaner. To prevent damage to plastic parts, avoid abrasive cleaning aids such as steel wool etc.
  
  
• Waterguard - We recommend that during each bottle change you clean the waterguard area to keep it free of water.
  
  
• Drip Tray – The drip tray should be emptied and cleaned regularly. To remove pull drip tray straight forward from cabinet.

Installation of the water cooler

• Locate water cooler in a well-ventilated space.
  
  
• Insure proper ventilation by maintaining a minimum clearance of 2” (61mm) on sides and rear of cooler. Make sure cooler is on a level surface.
  
• To prevent algae from growing, do not locate cooler near direct sunlight.
  
  
• Do not use this cooler to chill or heat any liquids other than Aloha Water Purified or Distilled water.

Hot / Cold Water dispenser

• To turn on your hot tank you will find a toggle switch located on the back of the unit.